Steel-cap boots for boilermakers and hot work
This page may later include affiliate links. If you buy through one, the site may earn a commission, at no extra cost to you. Your site's PPE rules still decide what you can wear. This is not medical advice, and a listed standard is not a sign-off for your job.
Maker claims below were checked on 19 Nov 2026 from the official pages linked at the end. I could not open the current Safe Work Australia model welding code as a PDF, so the workplace wording I quote is from the SafeWork NSW Welding processes Code of Practice 2022. Check the code that applies in your state.
I have 20 years as a boilermaker and 4 years on pipeline, in steel-cap boots the whole time. The brands I stick to are Blundstone, Oliver and Mongrel. When I buy a pair, I pick Oliver, because in my view they have the best quality, feel comfortable, and last me the longest. I wear zip-side boots, and I do not need a wide fit. I like a high-cut boot, so trousers can cover the top opening. That is a general preference, not a claim that I chose the cut for sparks. My sites just require steel-cap safety boots. Right now I wear Oliver AT, or All Terrain, boots. I cannot recall the types of the earlier pairs. The codes below are official examples, not a claim that I welded in that exact pair. What usually finishes a pair for me is getting waterlogged, broken stitching, wet socks, or the boot just not feeling comfortable any more. More on that is in when a work boot is actually finished.
A listed heat figure is not a sign-off for a welding bay or a fab shop. Your employer's PPE list still wins.
What official pages ask you to look for
Blundstone's guide to choosing a work boot says the heat resistance of the outsole matters for many industries, and that you should select boots with a high heat resistance (572°F) if you could be exposed to hot surfaces and materials such as road resurfacing and swarf. 572°F is 300°C.
SafeWork NSW's 2022 welding code of practice says foot protection should be non-slip and be heat and fire resistant, and to avoid foot protection which has the potential to capture hot sparks and metal debris, for example in laces or in open style shoes. It points to the AS/NZS 2210 set, including AS/NZS 2210.1, for further information. The same table lists leather spats as clothing, alongside flame-resistant long-sleeved shirts, long trousers and aprons. In a separate electrical-risk example, it says rubber-soled boots will reduce the risk of electric shock if the welder has to stand on metallic surfaces that form part of the electric circuit, and it lists rubber insulated shoes among PPE to wear during welding. That is guidance from a NSW code, not a Queensland site rule, and it is not a ban on a zip-side leather boot. I could not open the current national model code PDF to compare the wording.
What a 300°C sole actually claims
The heat figures on these pages are about the outsole, usually described as resistance to hot surface contact. They are not, on the pages I opened, a published weld-spatter test for the leather upper.
Blundstone's 300°C collection, and the XFoot 992 product page, say the outsole is heat resistant to temperatures up to at least 300°C, has a very high insulating value, and can be expected to provide short-term resistance to melting and cracks in the highest temperature ranges normally encountered in an industrial environment. Oliver's AT 55 pages describe a dual density PU and rubber sole "resistant to 300°C surface contact". She wear lists HRO as "resistance to hot contact". That page does not state a temperature, so I do not treat HRO and a 300°C claim as automatically the same mark unless the label says both.
Mongrel's FAQ draws a clear split: TPU is heat resistant to up to 130°C, and is "suitable for most work environments"; nitrile rubber is heat resistant up to 300°C, "making it more suitable for people who work on very hot surfaces". The common ZipSider 261 uses a TPU/PU ToughSider sole, so the 130°C figure is the one that applies unless you pick a Vibram rubber model. A 130°C sole is not a 300°C sole.
Height, sparks and debris
Oliver's AT 55 range page says the series takes the AT 45 idea and adds a taller profile, available up to 200mm, "making it the go-to for welders, metal fabricators, and anyone working with heat, sparks, or debris that can enter lower boots". Oliver's metals industry page calls the AT 55 high-cut boot a favourite there, "protecting against welding splatter and grinding debris". That is Oliver's wording, not a test I ran, and not a claim about a named pair I wore. I like a high-cut boot myself, so trousers can cover the top opening. I am not saying I picked that cut for sparks.
The official 200mm example in that steel-cap series is the 55380 hi-leg black zip boot. The page lists a NATURE form steel toe cap, a quick-release side zip, water-resistant leather to DIN 3, and the same 300°C PU and rubber sole claim as the 150mm 55345Z.
What the makers list, where I could verify a heat claim
| Oliver AT 55, 55345Z and 55380 | Blundstone XFoot 992 | Mongrel Vibram 561060 and 545030 | |
|---|---|---|---|
| Style | 55345Z is a 150mm zip-sided steel-cap boot. 55380 is the 200mm hi-leg zip in the same series | Zip-sided lace-up steel-cap boot. The official page says the zip-sided lace up is for easy on, easy off convenience | 561060 is a high-leg zip with a moulded PU scuff cap. 545030 is an elastic-sided boot with a scuff cap |
| List price on the maker page | No price was listed on the official pages I opened | $279.95 | RRP $279.95 for the 561060. RRP $229.95 for the 545030 |
| Cap and standards | NATURE form Type 1 steel toe cap, 200 joules, AS 2210.3:2019. The 55345Z page also lists ASTM F2413-18 and EN ISO 20345:2011 | Broad fitting Type 1 steel toe cap, tested to resist a 200 joule impact. Certified to AS 2210.3:2019 and ASTM F2413-18, including EH (clause 5.6) | 200J steel toe cap. AS 2210.3:2019, ISO 20345:2011 MOD, and ASTM F2413 |
| Sole heat | Dual density PU and rubber sole, resistant to 300°C surface contact, SRC, anti-static | Rubber outsole, heat resistant to at least 300°C, in the wording quoted above. The 992 is also listed in Blundstone's 300°C Heat Resistant collection | Vibram rubber outsole, described as heat, oil and acid resistant. The 545030 page badges that sole as "VIBRAM ® RUBBER OUTSOLE (300°C)". Mongrel's FAQ says its nitrile rubber Vibram soles are heat resistant up to 300°C |
| Upper and extra claims | Water-resistant full grain leather, DIN 3. I did not find a flame-retardant or molten-metal run-off claim on these AT 55 pages | The 992 page I opened does not use the words waterproof, flame-retardant, or molten metal | The 561 page says Nomex vamp stitching "adds fire resistance where it matters most", and describes the 561 as at home in "Mining. Furnace heat. Steel yards". That is Mongrel's wording, not a molten-metal run-off claim like the Oliver smelter boot |
The Blundstone RotoFlex 8060, used as a zip-side example elsewhere on this site, was not listed in the 300°C Heat Resistant collection I opened, and the 8060 product page I opened earlier did not list a heat figure. I do not treat it as a hot-work sole. The everyday Mongrel ZipSider 261 is a TPU/PU sole, not the Vibram 300°C option.
A specialist smelter boot is a different tool
Oliver's HS 66 66398 smelter boot is a steel-cap example with a heat-resistant, flame-retardant leather upper "designed to assist the run-off of molten metal", an internal metatarsal guard, EH protection, and a 300°C nitrile rubber sole. That is a much more specific official claim than a 150mm leather zip boot with a 300°C outsole. I have not said I wear a smelter boot. If your site names molten-metal, metatarsal or a flame-retardant upper, read that rule and the label, not a general shortlist.
Laces, zips and capturing debris
The NSW welding code's example of debris caught in laces is worth reading if you weld. It is not, on its own, a ruling that a lace-up is banned or that a zip or an elastic-side boot is approved. I wear zip-side boots. I never take them off at lunch, and I do not recall a problem with mud in the zip.
I have not worn Steel Blue, so it is not in this shortlist. More on closures is in zip-side vs elastic-side, and more on the Oliver steel-cap lines is in the Oliver range overview.
Buying later
Affiliate programs are not signed up. These are placeholders only. Oliver is listed first because it is my own pick, as an opinion, not because I compared lab heat tests myself.
Oliver AT 55 55380: {{AFF:workwearhub:oliver-55380}} {{AFF:amazon:oliver-55380}}
Oliver AT 55 55345Z: {{AFF:workwearhub:oliver-55345z}} {{AFF:amazon:oliver-55345z}}
Blundstone XFoot 992: {{AFF:workwearhub:blundstone-992}} {{AFF:amazon:blundstone-992}}
Mongrel 561060: {{AFF:workwearhub:mongrel-561060}} {{AFF:amazon:mongrel-561060}}
Mongrel 545030: {{AFF:workwearhub:mongrel-545030}} {{AFF:amazon:mongrel-545030}}
Sources, as checked 19 Nov 2026
- Blundstone, choosing the right work boot, including outsole heat and 572°F, blundstone.com.au/pages/choosing-the-right-work-boot
- Blundstone 300°C Heat Resistant collection, blundstone.com.au/collections/300c-heat-resistant
- Blundstone XFoot 992, blundstone.com.au/products/mens-or-womens-xfoot-style-992
- Blundstone RotoFlex 8060, no heat figure on the product page I opened earlier, blundstone.com.au/products/mens-or-womens-rotoflex-style-8060
- Oliver AT 55 series, oliver.com.au/ranges/at-55-series
- Oliver metals industry page, oliver.com.au/industry/metals
- Oliver AT 55 55345Z, oliver.com.au/55-series-150mm-black-zip-sided-boot-55345z
- Oliver AT 55 55380, oliver.com.au/55-series-200mm-hi-leg-black-zip-sided-boot-55-380
- Oliver HS 66 66398 smelter boot, oliver.com.au/66-series-black-smelter-boot-66-398
- Mongrel FAQ, TPU 130°C and nitrile rubber 300°C, mongrelboots.com.au/faq/
- Mongrel Vibram page, mongrelboots.com.au/vibram/
- Mongrel high-leg ZipSider 561060, mongrelboots.com.au/product/high-leg-zipsider-boot-w-scuff-cap/
- Mongrel 545030 elastic-sided with scuff cap, mongrelboots.com.au/product/elastic-sided-boot-w-scuff-cap-2/
- Mongrel ZipSider 261, TPU/PU ToughSider sole, mongrelboots.com.au/product/zipsider-boot/
- She wear certifications, including the HRO wording, shewear.com.au/pages/certifications
- SafeWork NSW, Welding processes Code of Practice 2022, Table 2, foot protection, safework.nsw.gov.au/.../Code-of-practice_Welding-processes_2022.pdf
- Safe Work Australia model code page, which I could not download as readable PDF text, safeworkaustralia.gov.au/doc/model-code-practice-welding-processes